Configuration Inter Vlan Routing Dalam Jaringan

CONFIGURATION PADA ROUTER

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/1

Router(config-if)#no ip add

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

PEMECAHAN  IP PADA ROUTER UNTUK VLAN YANG KITA BUAT

Router(config-if)#int fa0/1.1

%LINK-5-CHANGED: Interface FastEthernet0/1.1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1.1, changed state to up

Router(config-subif)#ENCApsulation DOt1Q 30

Router(config-subif)#IP ADD 192.168.1.1 255.255.255.0

Router(config-subif)#NO SHUT

Router(config-subif)#EXIT

Router(config)#int fa0/1.2

%LINK-5-CHANGED: Interface FastEthernet0/1.2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1.2, changed state to up

Router(config-subif)#ENCApsulation DOt1Q 40

Router(config-subif)#IP ADD 192.168.2.1 255.255.255.0

Router(config-subif)#NO SHUT

Router(config-subif)#EXIT

Router(config)#int fa0/1.3

%LINK-5-CHANGED: Interface FastEthernet0/1.3, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1.3, changed state to up

Router(config-subif)#ENCApsulation DOt1Q 50

Router(config-subif)#IP ADD 192.168.3.1 255.255.255.0

Router(config-subif)#NO SHUT

Router(config-subif)#EXIT

LAKUKAN RIP PADA ROUTER

Router(config)#ROUTER RIP

Router(config-router)#VERSION 2

Router(config-router)#NET 192.168.1.0

Router(config-router)#NET 192.168.2.0

Router(config-router)#NET 192.168.3.0

Router(config-router)#EXIT

Router(config)#

CONFIGURATION PADA SERVER

Switch>ENA

Switch#CONF T

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#HOSTNAME SERVER

SERVER(config)#VTP DOMAIN cyberlinggau.blogspot.com

Changing VTP domain name from NULL to cyberlinggau.blogspot.com

SERVER(config)#int fa0/3

SERVER(config-if)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up

SERVER(config-if)#exit

SERVER(config)#int fa0/2

SERVER(config-if)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

SERVER(config-if)#exit

SERVER(config)#

MEMBAGI  3 VLAN PADA SERVER UNTUK ACCESS KE PC

1.      Pc dosen

2.      Pc karyawan

3.      Pc siswa

SERVER>ena

SERVER#conf t

Enter configuration commands, one per line.  End with CNTL/Z.  

SERVER(config)#int fa0/4

SERVER(config-if)#swi mode acc

SERVER(config-if)#swi acc vlan 30

% Access VLAN does not exist. Creating vlan 30

SERVER(config-if)#desc dosen

SERVER(config-if)#exit

SERVER(config)#int fa0/5

SERVER(config-if)#swi mode acc

SERVER(config-if)#swi acc vlan 40

% Access VLAN does not exist. Creating vlan 40

SERVER(config-if)#desc karyawan

SERVER(config-if)#exit

SERVER(config)#int fa0/6

SERVER(config-if)#swi mode acc

SERVER(config-if)#swi acc vlan 50

% Access VLAN does not exist. Creating vlan 50

SERVER(config-if)#desc siswa

SERVER(config-if)#exit

CONFIGURATION PADA CLIENT_1

Switch>ena

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#hostname CLIENT_1

CLIENT_1(config)#INT FA0/2

CLIENT_1(config-if)#SWItchport MODE TRUnk

CLIENT_1(config-if)#EXIT

CLIENT_1(config)#VTP DOMAIN cyberlinggau.blogspot.com

Domain name already set to cyberlinggau.blogspot.com.

CLIENT_1(config)#vtp mode client

Setting device to VTP CLIENT mode.

CLIENT_1(config)#exit

CLIENT_1#

%SYS-5-CONFIG_I: Configured from console by console

ACCEESS VLAN 30 UNTUK PC DOSEN

CLIENT_1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

CLIENT_1(config)#int fa0/1

CLIENT_1(config-if)#swi

CLIENT_1(config-if)#switchport mode acc

CLIENT_1(config-if)#swi acc vlan 30

CLIENT_1(config-if)#desc dosen

CLIENT_1(config-if)#exit

ACCEESS VLAN 40 UNTUK PC KARYAWAN

CLIENT_1(config)#int fa0/3

CLIENT_1(config-if)#switchport mode acc

CLIENT_1(config-if)#swi acc vlan 40

CLIENT_1(config-if)#desc karyawan

CLIENT_1(config-if)#exit

ACCEESS VLAN 50 UNTUK PC SISWA

CLIENT_1(config)#int fa0/4

CLIENT_1(config-if)#switchport mode acc

CLIENT_1(config-if)#swi acc vlan 50

CLIENT_1(config-if)#desc siswa

CLIENT_1(config-if)#exit

CLIENT_1(config)#

CONFIGURATION PADA CLIENT_2

Switch>ena

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#hostname CLIENT_2

CLIENT_2(config)#int fa0/3

CLIENT_2(config-if)#switchport  mode trunk

CLIENT_2(config-if)#exit

CLIENT_2(config)#vtp domain cyberlinggau.blogspot.com

Domain name already set to cyberlinggau.blogspot.com.

CLIENT_2(config)#vtp mode client

Device mode already VTP CLIENT.

CLIENT_2(config)#exit

CLIENT_2#

%SYS-5-CONFIG_I: Configured from console by console

ACCEESS VLAN 30 UNTUK PC DOSEN

CLIENT_2>ena

CLIENT_2#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

CLIENT_2(config)#int fa0/1

CLIENT_2(config-if)#swi mode acc

CLIENT_2(config-if)#swi acc vlan 30

CLIENT_2(config-if)#desc dosen

CLIENT_2(config-if)#exit

ACCEESS VLAN 40 UNTUK PC KARYAWAN

CLIENT_2(config)#int fa0/2

CLIENT_2(config-if)#swi mode acc

CLIENT_2(config-if)#swi acc vlan 40

CLIENT_2(config-if)#desc karyawan

CLIENT_2(config-if)#exit

ACCEESS VLAN 50 UNTUK PC SISWA

CLIENT_2(config)#int fa0/4

CLIENT_2(config-if)#swi mode acc          

CLIENT_2(config-if)#swi acc vlan 50

CLIENT_2(config-if)#desc siswa

CLIENT_2(config-if)#exit

CLIENT_2(config)#